My Basket

0
You have no items in your shopping cart.

UKs No1 LED Bulbs and Drivers

  0113 3205011 | E: info@ledhive.co.uk

Mon - Fri : 9am - 6pm | Sat : 9am - 4.30pm

  • FREE Delivery On Orders over £75
  • 2 YEAR warranty
  • 30-DAY money back
  • 0% VAT
LH MR1612W Driver

LH MR1612W Driver

Availability: 1403 In stock

£7.80
Price
Quality
Value
20 Review(s)
OR

HIVE LED Drivers inc MR16 connector - Zero Interference with Dab and Wifi


Easy to install simply remove old transformer and replace with these drivers.

If you feel that the LED bulbs you have just purchased are not bright as they should be, or are flickering, then you need to install these drivers.

Your current transformers uses a lower frequency hertz and provides AC output which causes LED bulbs to flicker and a reduction in brightness. Running your bulbs with old transformers will surely reduce the life of the LED bulb. If you are going to spend money replacing your MR16 halogens with LED bulbs then please think about also replacing your transformers with these drivers. This will save you money in the long run. 

These LED drivers are suitable for all G4, MR11, MR16/GU5.3 LED bulbs and also most LED strip lights, just make sure the maximum wattage of the strip light does not exceed the output power of the LED driver

   

- Output Voltage (V) 12v DC

- Input Voltage (V) 240V AC

- 50/60Hz V

- Power output 0.5 - 12w

- Current 500ma

-  Short circuit and overload protection

- Max Ambient Temp (deg. C) 45 deg. C

- Max Case Temp (deg. C) 75 deg C

- Size: L 88mm x W 37mm x H 22mm

 

Please Note: 

If you have a few LED lamps to dim, then the total wattage will not be enough to load the dimmer. For example, four 5w LED lamps in a small room will only total 20w whilst the minimum load on a 250w dimmer is 25w. This means that the dimmer will simply not work. In these circumstances a low load dimmer rated at 10w – 250w would be required. We recommend Hive Kengo LED Module or Varilight  

Under normal circumstances, so long as the minimum load is exceeded, dimming mains voltage LED lamps is not an issue so long as the minimum load is observed.

 

CE And RoHS Approved:

All Electrical work should be carried out by an qaulified Electrician

Customer Reviews

Items 1 to 10 of 20 total

per page
Page:
  1. 1
  2. 2
Excellent product Review by Architect Joe
Price
Quality
Value
Excellent product. Made even easier to install as they were prewired. Quick start up time when switching on, no really noticeable lag. Used 12 of these LED 0.5 - 12W drivers when swapping out old low voltage drivers that ran 50W GU5.3 MR16 halogens to new 4W GU5.3 MR16 LED lamps. No flickering and so far, no problems at all. (Posted on 12/12/2018)
Three Stars Review by John & Angela Price
Price
Quality
Value
Prompt delivery good price (Posted on 17/01/2017)
Possible QC issue Review by P N Appleton
Price
Quality
Value
Worked well, Easy to connect as advertised. Sadly one of them "blew" after a couple of hours; but the rest continue to do their duty.
I dismembered the blown one, and the build quality was obviously poor, with a very scruffy-looking circuit board. Probably a QC issue (Posted on 17/01/2017)
led transformer Review by martin meades
Price
Quality
Value
great piece of kit, works perfect on my leds, and best value for money I found. (Posted on 17/01/2017)
does the job well and good value Review by S. Zam
Price
Quality
Value
does the job well, the one I have is not like the picture, its smaller but drives 2x2.5W led lights just fine (Posted on 17/01/2017)
Works perfectly. Simple to fit. Product lost in ... Review by terry w
Price
Quality
Value
Works perfectly. Simple to fit. Product lost in post but the company sorted this out with a replacement very efficiently. (Posted on 17/01/2017)
This is an ideal LED driver for use in a ..., Review by RobinJ
Price
Quality
Value
This is an ideal LED driver for use in a confined space (it's roughly 40mm x 27mm x 20mm) so long as you only want 6W max. If it's driving a single MR16 lamp in a conventional luminaire, it's a doddle to fit.I had a different application, so had to cut off the connector; but it's still a cheap solution! (Posted on 17/01/2017)
Five Stars Review by Brian D
Price
Quality
Value
works very well with the led s purchased at the same time, recommended (Posted on 01/09/2015)
Good having the bulb holder connected directly to the unit Review by Charles
Price
Quality
Value
Good having the bulb holder connected directly to the unit. Saves another connector. Working well with the 6 watt MR16 bulbs also from Led Hive. (Posted on 01/09/2015)
Great product Review by Shane W
Price
Quality
Value
Excellent service and quality product
LED lights work a treat (Posted on 01/09/2015)

Items 1 to 10 of 20 total

per page
Page:
  1. 1
  2. 2

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Certification