My Basket

You have no items in your shopping cart.

UKs No1 LED Bulbs and Drivers

  0113 3205011 | E:

Mon - Fri : 9am - 6pm | Sat : 9am - 4.30pm

  • FREE Delivery On Orders over £75
  • 2 YEAR warranty
  • 30-DAY money back
  • 0% VAT
LH 12WCBDimm Driver

LH 12WCBDimm Driver

Availability: 410 In stock

2 Review(s)

NEW! LEDHIVE 12W Dimmable LED Drivers Connector Block

Easy to install simply remove old transformer and replace with these drivers.

If you feel that the LED bulbs you have just purchased are not bright as they should be, or are flickering, then you need to install these drivers.

Smooth Dimming Technology. Please ensure you use a suitable LED Dimmer switch which has the correct load.

Your current transformers uses a lower frequency hertz and provides AC output which causes LED bulbs to flicker and a reduction in brightness. Running your bulbs with old transformers will surely reduce the life of the LED bulb. If you are going to spend money replacing your MR16 halogens with LED bulbs then please think about also replacing your transformers with these drivers. This will save you money in the long run. 

These LED drivers are suitable for all G4, MR11, MR16/GU5.3 LED bulbs and also most LED strip lights, just make sure the maximum wattage of the strip light does not exceed the output power of the LED driver


- Output Voltage (V) 12v DC

- Input Voltage (V) 240V AC

- 50/60Hz V

- Power output 0.5 - 12w

- Current 1000ma

- Short circuit and overload protection

- Max Ambient Temp (deg. C) 40 deg. C

- Max Case Temp (deg. C) 80 deg C

- Size: L55 x W35 x H28mm

Please Note: 

If you have a few LED lamps to dim, then the total wattage will not be enough to load the dimmer. For example, four 5w LED lamps in a small room will only total 20w whilst the minimum load on a 250w dimmer is 25w. This means that the dimmer will simply not work. In these circumstances a low load dimmer rated at 10w – 250w would be required. We recommend Hive Kengo LED Module or Varilight  

Under normal circumstances, so long as the minimum load is exceeded, dimming mains voltage LED lamps is not an issue so long as the minimum load is observed.

CE And RoHS Approved:

All Electrical work should be carried out by an Electrician

Customer Reviews

2 Item(s)

per page
Happy customer Review by Andrew
Good product (Posted on 06/10/2018)
All good Review by David L
Purchased 4 of these units several months ago from this seller and they all continue to work perfectly, smooth dimming. Recommended. (Posted on 06/10/2018)

2 Item(s)

per page

Write Your Own Review

Only registered users can write reviews. Please, log in or register