LEDHive 27SMD GU10 6W - 240V - 480LM Dimmable
- Buy 20 for £5.00 £5.00 each and save 9%
This LED bulb consist of 27 high quality light emitting diodes omitting 17.8 lumens each, approximately 480 lumens in total, that’s equivalent to 50 to 65w. They are intelligently designed to considerably reduce energy consumption by up to 90% and same time matching the light emitted compared to a standard halogen. The bulbs are available in both Warm and Cool white options made with aluminium housing and glass front.
These bulbs will install into any GU10 socket with an input voltage of 85 – 265V AC and is designed for any commercial, domestic or retail installation. Only consuming 6w of energy compared to 50w halogen, thereby offering significant savings that consumers should not ignore.
Lasting 50,000 hours compared to halogen bulb which only last 1500 – 2000, LED bulbs will pay for themselves within 3 to 6 months of installation. Homeowners and businesses can go many years without the hassle of having to change an LED bulb. Because of the way this bulb is designed there is very little heat generated compared to a halogen bulb. Most of the heat in this bulb is dissipated through its aluminium housing.
- Dimmable 6W led bulb producing 480 lumens
- 50,000 life span
- Instant light – no warming up
- Shock proof - unlike filament bulbs
- Environment friendly – LED bulbs contain no Glass or Mercury
- Aluminium Housing for better heat dissipation.
- 27 Surface Mount Diodes
Non-dimmable LED lamps cannot be dimmed. Should you fit a dimmer to non-dimmable LED’s then damage to the dimmer, lamps or both will occur.
Mains voltage dimmable LED light bulbs can be dimmed using an ordinary resistive dimmer. LED lamps are an attractive proposition as they consume very low wattage's and are very energy efficient. This can cause problems when choosing the correct dimmer.
If you have a few LED lamps to dim, then the total wattage will not be enough to load the dimmer. For example, four 5w LED lamps in a small room will only total 20w whilst the minimum load on a 250w dimmer is 25w. This means that the dimmer will simply not work. In these circumstances a low load dimmer rated at 5 – 50w would be required.
Under normal circumstances, so long as the minimum load is exceeded, dimming mains voltage LED lamps is not an issue so long as the minimum load is observed.
|Also Called||GU10 Spotlight | Recessed Light | Spotlights|
|Cut Out||This is the diameter of the opening required to fit the fitting.|
|Certification||CE | RoHs|
|Size (Dxl )||50mm x 55mm|
|MSRP||Recommended Retail Price. This is the retail price recommended by manufacturers for sale of their products.|